Surface Mount 119 Pin Memory IC 4.5 Mb kb 14mm mm 340mA mA 36b b
SOT-23
71V25761S183BG8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
BGA
Number of Pins
119
Packaging
Tape & Reel
Published
2009
JESD-609 Code
e0
Pbfree Code
no
Part Status
Discontinued
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
119
Terminal Finish
Tin/Lead (Sn63Pb37)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
PIPELINED ARCHITECTURE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
BOTTOM
Terminal Form
BALL
Peak Reflow Temperature (Cel)
225
Number of Functions
1
Supply Voltage
3.3V
Frequency
183MHz
Time@Peak Reflow Temperature-Max (s)
20
Pin Count
119
Operating Supply Voltage
3.3V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
3.465V
Min Supply Voltage
3.135V
Number of Ports
1
Nominal Supply Current
340mA
Memory Type
RAM, SRAM
Access Time
3.3 ns
Output Characteristics
3-STATE
Address Bus Width
17b
Density
4.5 Mb
Standby Current-Max
0.03A
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
36b
Length
14mm
Height Seated (Max)
2.36mm
Width
22mm
Thickness
2.15mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
71V25761S183BG8 Product Details
71V25761S183BG8 Overview
A RAM, SRAM-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape & Reel case as well. Embedded in the BGA case, memory ics is a single file. A total of 119 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. A 119-pin package containing this memory device is used to house this device. The memory device in question has 119 pins, thus indicating that it has 119 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 340mA for this memory component. This chip features all the merits of a conventional chip, but it also features PIPELINED ARCHITECTURE to improve system performance. 1 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 3.135V. An operating voltage of no more than 3.465V is required. A frequency of 183MHz is used to process the data on this memory chip.
71V25761S183BG8 Features
Package / Case: BGA 119 Pins Operating Supply Voltage:3.3V Additional Feature:PIPELINED ARCHITECTURE I/O Type: COMMON Freguency at 183MHz 183MHz terminals
71V25761S183BG8 Applications
There are a lot of Integrated Device Technology (IDT) 71V25761S183BG8 Memory applications.