71V3556SA133BGG Overview

RAM, SDR, SRAM is the type of memory it has. The BGA case contains it. The chip has an 512kB memory. The chip has 119 terminations. For a comprehensive working procedure, this part supports as many as 1 functions. In order to operate this memory device, it must be supplied with 3.3V of power. The memory device is enclosed in a package with an 119-pin connector. There are 119 pins on this memory device, which indicates it has 119 memory locations in it. A voltage of 3.3V is noted as the operating supply voltage for this memory. In this chip, Surface Mount mounting is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component is rated at 300mA. A memory address is accessed through 1 ports on this chip. I/O port addresses on this device are mapped to memory addresses of COMMON bits. This device must operate at a minimum temperature of 0°C. Temperatures no higher than 70°C degrees Celsius are recommended for operation. It is usually considered a type of SRAMs component. It is recommended that the minimum supply voltage for this part be no less than 3.135V. Ideally, this part should be supplied with a voltage of at least 3.465V. Data is processed by this memory ics at a frequency of 133MHz. This Memory chip has a maximum frequency of 133MHz.

71V3556SA133BGG Features

Package / Case: BGA
119 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
Freguency at 133MHz
133MHz terminals

71V3556SA133BGG Applications

There are a lot of Integrated Device Technology (IDT)
71V3556SA133BGG Memory applications.

• cell phones
• eSRAM
• mainframes
• multimedia computers
• networking
• personal computers
• servers
• supercomputers
• telecommunications
• workstations,