71V3558S100PFG Overview

RAM, SDR, SRAM is its memory type. There is a TQFP case embedded in it. A memory chip with a capacity of 512kB is used on this device. As you can see from the diagram, the chip is planted with 100 terminations. It supports up to 1 functions for comprehensive operation. A voltage of 3.3V is required for the operation of this memory device. It is encased in an 100-pin package that contains this ic memory chip. The memory device has a total of 100 pins, thus indicating that it has a total of 100 memory locations. A voltage of 3.3V is noted as the operating supply voltage for this memory. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. The nominal supply current of this memory component is 250mA. A memory address is accessed through 1 ports on this chip. An COMMON-bit memory mapped I/O port address is used to address this device. A minimum operating temperature of 0°C must be met by this device. The part should not be operated at temperatures above 70°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The SRAMs component is usually regarded as a type of this component. If this part is to be used, the minimum supply voltage should not be less than 3.135V volts. In order for it to operate properly, its voltage should not exceed 3.465V. The frequency of data processing on this memory chip is 100MHz. There is a maximum frequency of 100MHz on this memory chip.

71V3558S100PFG Features

Package / Case: TQFP
100 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
Freguency at 100MHz
100MHz terminals

71V3558S100PFG Applications

There are a lot of Integrated Device Technology (IDT) 71V3558S100PFG Memory applications.

• personal computers
• printers
• eSRAM
• eDRAM
• servers
• networks
• supercomputers
• graphics card
• workstations,
• telecommunications