Surface Mount 100 Pin Memory IC 4.5 Mb kb 20mm mm 250mA mA 18b b
SOT-23
71V3559S80PFG Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
12 Weeks
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
100
Published
2009
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
100
Terminal Finish
Matte Tin (Sn) - annealed
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
FLOW-THROUGH ARCHITECHTURE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.65mm
Frequency
95MHz
Time@Peak Reflow Temperature-Max (s)
30
Pin Count
100
Qualification Status
Not Qualified
Operating Supply Voltage
3.3V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
3.465V
Min Supply Voltage
3.135V
Memory Size
512kB
Number of Ports
1
Nominal Supply Current
250mA
Memory Type
RAM, SDR, SRAM
Frequency (Max)
100MHz
Access Time
8 ns
Output Characteristics
3-STATE
Address Bus Width
18b
Density
4.5 Mb
Standby Current-Max
0.04A
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
18b
Length
20mm
Width
14mm
Thickness
1.4mm
RoHS Status
RoHS Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
144
$4.29153
$617.98032
71V3559S80PFG Product Details
71V3559S80PFG Overview
A RAM, SDR, SRAM-type memory can be classified as the memory type of this device. Embedded in the TQFP case, memory ics is a single file. On the chip, there is an 512kB memory, which is the size of the chip's memory. A total of 100 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. A 100-pin package containing this memory device is used to house this device. The memory device in question has 100 pins, thus indicating that it has 100 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 250mA for this memory component. This chip features all the merits of a conventional chip, but it also features FLOW-THROUGH ARCHITECHTURE to improve system performance. 1 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 3.135V. An operating voltage of no more than 3.465V is required. A frequency of 95MHz is used to process the data on this memory chip. A ic memory chip with this frequency has a maximum speed of 100MHz.
71V3559S80PFG Features
Package / Case: TQFP 100 Pins Operating Supply Voltage:3.3V Additional Feature:FLOW-THROUGH ARCHITECHTURE I/O Type: COMMON Freguency at 95MHz 95MHz terminals
71V3559S80PFG Applications
There are a lot of Integrated Device Technology (IDT) 71V3559S80PFG Memory applications.