71V65603S150BQGI8 Overview

A RAM, SDR, SRAM-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape & Reel (TR) case as well. Embedded in the 165-TBGA case, memory ics is a single file. On the chip, there is an 1.1MB memory, which is the size of the chip's memory. There is a SRAM-format memory used in this device, which is the memory format used by mainstream devices. Featuring an extended operating temperature range of -40°C ~ 85°C (TA), this device allows it to be used in a variety of demanding applications. The device is capable of handling a supply voltage of 3.135 V ~ 3.465 V volts. The recommended mounting type for memory ics is Surface Mount. A total of 165 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. A clock frequency rotation within 150MHz is used for the ic memory chip to rotate data. Similar parts are frequently selected using the ic memory chip's base part number, IDT71V65603. A 165-pin package containing this memory device is used to house this device. The memory device in question has 165 pins, thus indicating that it has 165 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. This chip features all the merits of a conventional chip, but it also features PIPELINED ARCHITECTURE to improve system performance. 1 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. It is an important component of the - series memory devices used in a variety of applications. There must not be a minimum operating temperature of less than -40°C for this device. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. In order to operate your device, you will need to provide a maximum supply current of 0.345mA. Ideally, this part should be supplied with a voltage of at least 3.135V. An operating voltage of no more than 3.465V is required. A frequency of 150MHz is used to process the data on this memory chip. A ic memory chip with this frequency has a maximum speed of 150MHz.

71V65603S150BQGI8 Features

Package / Case: 165-TBGA
165 Pins
Operating Supply Voltage:3.3V
Additional Feature:PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 150MHz
150MHz terminals

71V65603S150BQGI8 Applications

There are a lot of Integrated Device Technology (IDT)
71V65603S150BQGI8 Memory applications.

• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card