71V65703S80BQ8 Overview

A RAM, SRAM-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape & Reel case as well. A total of 165 terminations have been planted on the chip. In order to power this memory device, 3.3V will be necessary. A clock frequency rotation within 95MHz is used for the ic memory chip to rotate data. A 165-pin package containing this memory device is used to house this device. The memory device in question has 165 pins, thus indicating that it has 165 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. 1 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. In order to operate your device, you will need to provide a maximum supply current of 0.25mA.

71V65703S80BQ8 Features

165 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON

71V65703S80BQ8 Applications

There are a lot of Integrated Device Technology (IDT)
71V65703S80BQ8 Memory applications.

• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card