71V65803S133BQG Overview

As far as memory types are concerned, RAM, SDR, SRAM is considered to be its memory type. A memory chip with a capacity of 1.1MB is used on this device. On the chip, there are 165 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 3.3V. The memory device has an 165-pin package, which encloses it in a small package. I have noticed that the memory device has 165 pins, which indicates that it has 165 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 3.3V. The memory chip also offers BURST COUNTER to level up system performance despite its merits. The memory chip has 1 ports for granting read/write access to one memory address. There are I/O ports on this memory ics that have COMMON-bit memory mapping. Temperatures below 0°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 70°C, otherwise damage to the part may occur as a result of overheating. As far as the supply current is concerned, it can be operated with a maximum of 0.3mA of currentIn most cases, this memory ics is regarded as being a type of SRAMs. It is recommended that this part be supplied with at least 3.135V volts. The operating voltage shall not exceed 3.465V. A ic memory chip like this one processes data at a frequency of 133MHz bits per second. A memory chip of this type can operate at a maximum frequency of 133MHz.

71V65803S133BQG Features

165 Pins
Operating Supply Voltage:3.3V
Additional Feature:BURST COUNTER
I/O Type: COMMON
Freguency at 133MHz
133MHz terminals

71V65803S133BQG Applications

There are a lot of Integrated Device Technology (IDT)
71V65803S133BQG Memory applications.

• servers
• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM