71V65803S150PFGI Overview

There is a RAM, SDR, SRAM memory type associated with this device. The file is embedded in a TQFP case. There is 1.1MB of memory on the chip. On the chip, there are 100 terminations that are planted. In total, 1 functions are supported by this part. In order to power this memory device, 3.3V will be necessary. An 100-pin package is used to package this memory device. I have noticed that the memory device has 100 pins, which indicates that it has 100 locations in the memory. This memory's operating supply voltage is 3.3V. It uses Surface Mount mounting, which is an efficient, straightforward mounting method. As far as the nominal supply current of this memory component is concerned, it is rated at 345mA. Despite all its merits, this chip also features PIPELINED ARCHITECTURE to boost system performance. Several ports on this chip are used to access one memory address for reading and writing. A memory map of COMMON bits has been added to the I/O port addresses of this device. Temperatures below -40°C should not be used with this memory ics. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. There is a common misconception that this component is a type of SRAMs. This part should have a minimum supply voltage of 3.135V. The operating voltage shall not exceed 3.465V. As a result of the frequency of this memory chip, data can be processed at a rate of 150MHz. There is a maximum frequency of 150MHz on this memory chip.

71V65803S150PFGI Features

Package / Case: TQFP
100 Pins
Operating Supply Voltage:3.3V
Additional Feature:PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 150MHz
150MHz terminals

71V65803S150PFGI Applications

There are a lot of Integrated Device Technology (IDT) 71V65803S150PFGI Memory applications.

• embedded logic
• eDRAM
• workstations,
• graphics card
• personal digital assistants
• DVD disk buffer
• networking
• data buffer
• supercomputers
• main computer memory