Welcome to Hotenda.com Online Store!

logo
userjoin
Home

71V67803S166PFG

71V67803S166PFG

71V67803S166PFG

Integrated Device Technology (IDT)

Surface Mount 100 Pin Memory IC 9 Mb kb 20mm mm 340mA mA 18b b

SOT-23

71V67803S166PFG Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 8 Weeks
Mount Surface Mount
Package / Case TQFP
Number of Pins 100
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3
Number of Terminations 100
Terminal Finish Matte Tin (Sn) - annealed
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature PIPELINED ARCHITECTURE
Subcategory SRAMs
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Frequency 166MHz
[email protected] Reflow Temperature-Max (s) 30
Pin Count 100
Operating Supply Voltage 3.3V
Temperature Grade COMMERCIAL
Interface Parallel
Max Supply Voltage 3.465V
Min Supply Voltage 3.135V
Memory Size 1.1MB
Number of Ports 1
Nominal Supply Current 340mA
Memory Type RAM, SDR, SRAM
Frequency (Max) 166MHz
Access Time 3.5 ns
Output Characteristics 3-STATE
Address Bus Width 19b
Density 9 Mb
Standby Current-Max 0.05A
I/O Type COMMON
Sync/Async Synchronous
Word Size 18b
Length 20mm
Width 14mm
Thickness 1.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $18.380400 $18.3804
10 $17.340000 $173.4
100 $16.358491 $1635.8491
500 $15.432538 $7716.269
1000 $14.558998 $14558.998
71V67803S166PFG Product Details

71V67803S166PFG Overview


RAM, SDR, SRAM is its memory type. As you can see, it is embedded in TQFP case. This chip has an 1.1MB size of memory on it, so a lot of data can be stored on it. A total of 100 terminations have been planted on the chip. In total, this part supports 1 functions. There is a requirement for 3.3V to be supplied to this ic memory chip in order to operate. An 100-pin package is used to package this memory device. I have noticed that the memory device has 100 pins, which indicates that it has 100 locations in the memory. There is a note stating that this memory chip operates at 3.3V. Using Surface Mount mounting, this chip offers straightforward and high-efficiency mounting. This memory chip is rated 340mA for its nominal supply current. The memory chip also offers PIPELINED ARCHITECTURE to level up system performance despite its merits. In this chip, there are 1 ports providing read and/or write access to one memory address. In addition to this device, there are COMMON-bit memory mapped I/O port addresses on this device. This device must not operate below 0°C . A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. The component is usually referred to as a type of SRAMs. In order for this part to work properly, there must be a minimum voltage supply of 3.135V volts. In order for it to operate properly, its voltage should not exceed 3.465V. The frequency of data processing on this memory chip is 166MHz. This Memory chip is capable of 166MHz max frequency.

71V67803S166PFG Features


Package / Case: TQFP
100 Pins
Operating Supply Voltage:3.3V
Additional Feature:PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 166MHz
166MHz terminals

71V67803S166PFG Applications


There are a lot of Integrated Device Technology (IDT) 71V67803S166PFG Memory applications.

  • personal digital assistants
  • networks
  • workstations,
  • Cache memory
  • personal computers
  • eSRAM
  • DVD disk buffer
  • hard disk drive (HDD)
  • cell phones
  • graphics card

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News