There is a neat TSSOP package used in buffer. A Tape and Reel external packaging is used for this buffer. A total of 2 elements are used. 20 terminations with different functions are available on this transceiver. An input voltage of 3.3V is required. FCT family part. With the electrical part, 20 pins are set. Surface Mount applications are suitable for it. There are 20 pins on digital buffer. The bus transceiver has 2 ports. For each element, there are 4 bits. In particular, automotive buffer is a type of Bus Driver/Transceivers. When the electronic component is quiescent, it uses 30μA. Users should apply 3.3V supply voltage to the lectronic component to run it safely and stably. As low as -40°C can be tolerated by it. You shouldn't let the amibient temperature get higher than 85°C when using this buffer. It outputs 8mA when it is in low-level mode, which is the default. There is a possibility of the electronic component conducting -8mA of current when it is in high-level output mode. It is recommended that the voltage used to run this electrical component is at least 2.7V. It is rated for a maximum supply voltage of 3.6V. ICs that use BUS DRIVER logic are known as BUS DRIVER logic transceivers. There is sufficient data to make 8 outputs from it. ENABLE LOW control technology allows the logical driver to start up.
74FCT3244PGG8 Features
Bus Driver/Transceivers High Level Output: 8mA Low Level Output: -8mA BUS DRIVER Logic IC
74FCT3244PGG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT3244PGG8 Buffers & Transceivers applications.