8N3Q001EG-1014CDI8 Overview

There is a CLCC enclosure with the programmable timer. Frequency is set to 125MHz on the programmable timer.It is used to pack in Tape & Reel case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 140mA voltage. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. The types of oscillator includes LVPECL. The timer clock contains 10 pins. The digital timer's operating supply voltage is rated 3.3V voltage. The supply voltage of the programmable timer can rate 3.3V. You can read the timer clock's additional feature in the follwing: ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT; SELECTABLE O/P FREQUENCIES; TR. On operating frequency, it's available in the range of 625MHz.

8N3Q001EG-1014CDI8 Features

Operate frequency at 125MHz
Package / Case: Tape & Reel
Max Operating temperature at -40°C
Additional Feature: ENABLE/DISABLE FUNCTION; DIFFERENTIAL OUTPUT; SELECTABLE O/P FREQUENCIES; TR

8N3Q001EG-1014CDI8 Applications

There are a lot of Integrated Device Technology (IDT)
8N3Q001EG-1014CDI8 Programmable Timers & Oscillators applications.

• Intruder Detection
• Tamper Detection
• Home Automation Sensors
• Thermostats
• Consumer Electronics
• Remote Sensors
• White Goods
• Electric Vehicles
• Always On Systems
• Clutch Actuator circuit