9DB206CLLFT Overview

Located in the Tape & Reel package, it can be accessed. TSSOP comes with the case. 28 terminations are found in it. Voltage 3.3V is provided by the part. To run 260, we utilize this part's peak reflow temperature. As of right 1w, the device has 1. There is a maximum frequency for normaloperation of 140MHz. 2003 Parts of the part have not been published. Circuits application is recommended to mount Circuits application wCircuits applicationh Surface Mount. 28 pins are provided on the device. The board includes 28 pins. Temperatures below 0°C are not permitted for this device. Temperatures should not exceed 70°C. 3.3V is the recommended supply voltage. Clock Drivers devices belong to this family. Voltage 3.465V is applied to this part. A supply voltage greater than 3.135V is needed to keep the device operating. Circuits application is possible to search for related parts based on the 9DB family of parts. PLL BASED CLOCK DRIVER logic ICs are used.

9DB206CLLFT Features

Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 28 Pins
operate supply voltage at the range of 3.3V
Logic IC Type: PLL BASED CLOCK DRIVER

9DB206CLLFT Applications

There are a lot of Integrated Device Technology (IDT)
9DB206CLLFT application specific timer applications.

• PCI Express 2.0/3.0
• Broadcast video/audio timing
• Processor and FPGA clocking
• Any-frequency clock conversion
• MSAN/DSLAM/PON
• Fibre Channel, SAN
• Telecom line cards
• 1 GbE and 10 GbE
• Servers, Storage, Search Acceleration
• Ethernet Switches, Routers