9DB403DFILFT Overview

A SSOP-serial number is attached to the packaging of this product, which is packaged in a case. Clock program has 28 terminations. Parts with 3.3V voltage are provided by the part. Run 260 using the peak reflow temperature of this part. A device with 1 has been detected. normaloperation is restricted to 400MHz frequency. 2012 parts of this part have been published. The Surface Mount mount is recommended. 28 pins are present on the device. There are 28 pins 28 this board. Temperatures below -40°C cannot be used for this device. Circuits application is recommended to operate at a temperature lower than 85°C. Ensure that the supply voltage is set to 3.3V. There are a number of devices within the Clock Drivers family. As far as supply voltage is concerned, this part is used at 3.465V. For the device to maintain a supply voltage above 3.135V. You can search for parts associated with the 9DB family based on the part number. This device uses a type PLL BASED CLOCK DRIVER logic IC.

9DB403DFILFT Features

Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 28 Pins
operate supply voltage at the range of 3.3V
Logic IC Type: PLL BASED CLOCK DRIVER

9DB403DFILFT Applications

There are a lot of Integrated Device Technology (IDT)
9DB403DFILFT application specific timer applications.

• Broadcast video/audio timing
• Processor and FPGA clocking
• Any-frequency clock conversion
• MSAN/DSLAM/PON
• Fibre Channel, SAN
• Telecom line cards
• 1 GbE and 10 GbE
• Servers, Storage, Search Acceleration
• Ethernet Switches, Routers
• Small Cells, Mobile Backhaul/Fronthaul