IDT49FCT3805APYGI8 Overview

SSOP case is available for the cut smart buffer. In case Cut Tape (CT), the cut smart buffer is available. Normal operation has a maximum value of 100MHz. A total of 20 terminations have been found in it. The supply voltage of 3.3V is capable of providing high efficiency. There is a place for it in the way of Surface Mount. On this board, there is a pin count of 20. In order for the timeing clock to operate, it is connected to the 20 pins. There is a circuit clock contained within Clock Drivers that is responsible for this function. It is designed to operate at a minimum temperature of -40°C in order to maintain reliability. In order to ensure stable operation, the maximum operating temperature must be set to 85°C. The electronic gadget belongs to the FCT family. This value is set to 3.6V for the maximum available supply voltage (Vsup). An IC with a value of LOW SKEW CLOCK DRIVER is used in order to achieve this. A voltage higher than 3V is necessary for normal operation of the system. There is a 3.3V volt supply that powers the timeing clock. It is possible to have 10 true outputs.

IDT49FCT3805APYGI8 Features

20 terminations
Clock Drivers subcategory
logic IC type of LOW SKEW CLOCK DRIVER

IDT49FCT3805APYGI8 Applications

There are a lot of Integrated Device Technology (IDT)
IDT49FCT3805APYGI8 Clock Buffers & Drivers applications.

• Clock signal level shifting
• High performance communication system
• Data center
• Cloud computing
• Network
• High speed industry
• High-end consumer electronics
• Data communication
• Telecommunications
• Computing