CDIP case is available for the cut smart buffer. In case Rail/Tube, the cut smart buffer is available. A total of 20 terminations have been found in it. The supply voltage of 5V is capable of providing high efficiency. There is a place for it in the way of Through Hole. On this board, there is a pin count of 20. In order for the timeing clock to operate, it is connected to the 20 pins. There is a circuit clock contained within Clock Drivers that is responsible for this function. It is designed to operate at a minimum temperature of -55°C in order to maintain reliability. In order to ensure stable operation, the maximum operating temperature must be set to 125°C. The electronic gadget belongs to the FCT family. An IC with a value of LOW SKEW CLOCK DRIVER is used in order to achieve this. By default, the output of the circuit clock is set to 10. There is a 5V volt supply that powers the timeing clock. It is capable of handling a maximum supply voltage of 5.5V volts. As low as possible is the source voltage 4.5V, which can be used by the system to work. It is recommended that the supply voltage be kept at 5V for maximum efficiency. The clock divider consumes 5μA quiescent current and is unaffected by external factors.
IDT49FCT805CTDB Features
20 terminations Clock Drivers subcategory logic IC type of LOW SKEW CLOCK DRIVER
IDT49FCT805CTDB Applications
There are a lot of Integrated Device Technology (IDT) IDT49FCT805CTDB Clock Buffers & Drivers applications.