5V V Surface Mount 44 Pin Memory IC 1 Mb kb 28.575mm mm 180mA mA 16b b
SOT-23
IDT71016S15Y Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Number of Pins
44
Packaging
Rail/Tube
Published
2010
JESD-609 Code
e0
Pbfree Code
no
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
44
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Terminal Position
DUAL
Terminal Form
J BEND
Peak Reflow Temperature (Cel)
225
Number of Functions
1
Supply Voltage
5V
Reach Compliance Code
not_compliant
Time@Peak Reflow Temperature-Max (s)
30
Pin Count
44
Qualification Status
Not Qualified
Operating Supply Voltage
5V
Power Supplies
5V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
5.5V
Min Supply Voltage
4.5V
Number of Ports
1
Nominal Supply Current
180mA
Memory Type
RAM, SRAM - Asynchronous
Access Time
15 ns
Output Characteristics
3-STATE
Memory Width
16
Address Bus Width
16b
Density
1 Mb
I/O Type
COMMON
Sync/Async
Asynchronous
Word Size
16b
Output Enable
YES
Length
28.575mm
Height Seated (Max)
3.683mm
RoHS Status
Non-RoHS Compliant
IDT71016S15Y Product Details
IDT71016S15Y Overview
In this case, the memory type of the device can be classified as RAM, SRAM - Asynchronous. Case Rail/Tube is available. It is planted on the chip with 44 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 5V to be supplied to this ic memory chip in order to operate. The ic memory chip comes in a package with 44 pins that allows it to be connected to a computer. The memory device has a total of 44 pins, thus indicating that it has a total of 44 memory locations. It is noted that the operating supply voltage of this memory is 5V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 180mA for its nominal supply current when it comes to the memory component. Several ports on this chip are used to access one memory address for reading and writing. In terms of power requirements, this memory chip uses only 5V . I/O port addresses in this device are mapped to COMMON bits from the device's memory. In order for this device to function properly, its operating temperature must not be less than 0°C. The temperature should not exceed 70°C degrees Celsius. This memory ics should not be operated with a voltage below 4.5V volts at the minimum. There shall be a voltage limit of 5.5V for its operation.
IDT71016S15Y Features
44 Pins Operating Supply Voltage:5V I/O Type: COMMON
IDT71016S15Y Applications
There are a lot of Integrated Device Technology (IDT) IDT71016S15Y Memory applications.