5V V Surface Mount 28 Pin Memory IC 256 kb kb 115mA mA 8b b
SOT-23
IDT71256L35Y Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Number of Pins
28
Packaging
Rail/Tube
Published
2005
JESD-609 Code
e0
Pbfree Code
no
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
28
ECCN Code
EAR99
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Subcategory
SRAMs
Technology
CMOS
Terminal Position
DUAL
Terminal Form
J BEND
Peak Reflow Temperature (Cel)
225
Number of Functions
1
Supply Voltage
5V
Reach Compliance Code
not_compliant
Time@Peak Reflow Temperature-Max (s)
30
Pin Count
28
Qualification Status
Not Qualified
Operating Supply Voltage
5V
Power Supplies
5V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
5.5V
Min Supply Voltage
4.5V
Number of Ports
1
Nominal Supply Current
115mA
Memory Type
RAM, SRAM - Asynchronous
Access Time
35 ns
Organization
32KX8
Output Characteristics
3-STATE
Memory Width
8
Address Bus Width
15b
Density
256 kb
I/O Type
COMMON
Sync/Async
Asynchronous
Word Size
8b
Standby Voltage-Min
2V
Output Enable
YES
Height Seated (Max)
3.556mm
RoHS Status
Non-RoHS Compliant
IDT71256L35Y Product Details
IDT71256L35Y Overview
RAM, SRAM - Asynchronous is its memory type. It is available in a case with a Rail/Tube shape. As you can see from the diagram, the chip is planted with 28 terminations. In total, 1 functions are supported by this part. The memory device designed for this application has been designed to be powered by an 5V power supply. It is encased in an 28-pin package that contains this ic memory chip. It has 28 pins indicating it has 28 memory locations. It is noted that the operating supply voltage of this memory is 5V. Chips such as this one are mounted using Surface Mount mounting, a straightforward method of mounting that is effective. Memory chip's nominal supply current is 115mA. An address can be read and/or written to one memory address using 1 ports on the chip. This memory chip requires a mere 5V of power. In addition to this device, there are COMMON-bit memory mapped I/O port addresses on this device. A minimum operating temperature of 0°C must be met by this device. As a general rule, memory ics is recommended that the product be operated at temperatures no higher than 70°Cc, otherwise, damage could be done to it. Generally, this component is considered a type of SRAMs. This memory ics requires a minimum voltage of 4.5V. In order for it to operate properly, its voltage should not exceed 5.5V.
IDT71256L35Y Features
28 Pins Operating Supply Voltage:5V I/O Type: COMMON
IDT71256L35Y Applications
There are a lot of Integrated Device Technology (IDT) IDT71256L35Y Memory applications.