Welcome to Hotenda.com Online Store!

logo
userjoin
Home

IDT71T75802S100PFG8

IDT71T75802S100PFG8

IDT71T75802S100PFG8

Integrated Device Technology (IDT)

Surface Mount 100 Pin Memory IC 18 Mb kb 20mm mm 175mA mA 18b b

SOT-23

IDT71T75802S100PFG8 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Mount Surface Mount
Package / Case TQFP
Number of Pins 100
Packaging Tape and Reel
Published 2015
JESD-609 Code e3
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 100
Terminal Finish Matte Tin (Sn) - annealed
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature PIPELINED ARCHITECTURE
Subcategory SRAMs
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Reach Compliance Code unknown
Frequency 100MHz
Pin Count 100
Qualification Status Not Qualified
Operating Supply Voltage 2.5V
Temperature Grade COMMERCIAL
Interface Parallel
Max Supply Voltage 2.625V
Min Supply Voltage 2.375V
Number of Ports 1
Nominal Supply Current 175mA
Memory Type RAM, SRAM
Access Time 5 ns
Output Characteristics 3-STATE
Memory Width 18
Address Bus Width 20b
Density 18 Mb
Standby Current-Max 0.04A
I/O Type COMMON
Sync/Async Synchronous
Word Size 18b
Standby Voltage-Min 2.38V
Length 20mm
RoHS Status RoHS Compliant
IDT71T75802S100PFG8 Product Details

IDT71T75802S100PFG8 Overview


As far as its memory type goes, it falls into the RAM, SRAM category. You can get memory ics in a Tape and Reel case. TQFP case encloses it. There are 100 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 2.5V volt power supply in order to operate properly. In this ic memory chip, there is an 100-pin package that encloses the device. It is worth noting that this memory device has 100 pins, which indicates it has 100 memory locations. This memory chip has an operating supply voltage of 2.5V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 175mA. Despite all its benefits, this memory chip also offers PIPELINED ARCHITECTURE for improved system performance. Using 1 ports, a single memory address can be read and/or written. A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least 0°C. Temperatures over 70°C°C are not recommended. There is a common misconception that this component is a type of SRAMs. If this part is to be used, the minimum supply voltage should not be less than 2.375V volts. The operating voltage of the memory ics shall not exceed 2.625V. There is an 100MHz frequency with which this memory chip processes data.

IDT71T75802S100PFG8 Features


Package / Case: TQFP
100 Pins
Operating Supply Voltage:2.5V
Additional Feature:PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 100MHz
100MHz terminals


IDT71T75802S100PFG8 Applications


There are a lot of Integrated Device Technology (IDT)
IDT71T75802S100PFG8 Memory applications.


  • multimedia computers
  • networking
  • personal computers
  • servers
  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News