Surface Mount 100 Pin Memory IC 18 Mb kb 20mm mm 250mA mA 18b b
SOT-23
IDT71T75902S80PF Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
100
Published
2005
JESD-609 Code
e0
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
100
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
FLOW-THROUGH ARCHITECTURE
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
2.5V
Terminal Pitch
0.65mm
Reach Compliance Code
not_compliant
Frequency
95MHz
Time@Peak Reflow Temperature-Max (s)
20
Pin Count
100
Qualification Status
Not Qualified
Operating Supply Voltage
2.5V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
2.625V
Min Supply Voltage
2.375V
Number of Ports
1
Nominal Supply Current
250mA
Memory Type
RAM, SRAM
Access Time
8 ns
Output Characteristics
3-STATE
Memory Width
18
Address Bus Width
20b
Density
18 Mb
Standby Current-Max
0.04A
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
18b
Standby Voltage-Min
2.38V
Length
20mm
RoHS Status
Non-RoHS Compliant
IDT71T75902S80PF Product Details
IDT71T75902S80PF Overview
There is a RAM, SRAM memory type associated with this device. There is a TQFP case embedded in it. The chip is terminated with 100 terminations. In total, this part supports 1 functions. Memory devices such as this one are designed to be powered by 2.5V and should be used as such. There are 100 pins on the package of the memory device. A memory device with 100 pins means that it contains 100 memory locations, indicating that it has 100 pins. This memory's operating supply voltage is 2.5V. Using Surface Mount mounting, this chip offers straightforward and high-efficiency mounting. It is rated for a nominal supply current of 250mA for this memory component. Despite all the merits of this chip, it also has FLOW-THROUGH ARCHITECTURE to boost system performance. This memory chip has 1 ports for accessing one memory address via read or write. There are COMMON-bit addresses mapped into the memory for I/O ports on this device. This device must not operate below 0°C . Ideally, this memory ics should be operated at a temperature of no more than 70°C°C. In order for this part to work properly, there must be a minimum voltage supply of 2.375V volts. Its operating voltage shall not exceed 2.625V. There is a frequency of 95MHz for the data to be processed on this memory chip.
IDT71T75902S80PF Features
Package / Case: TQFP 100 Pins Operating Supply Voltage:2.5V Additional Feature:FLOW-THROUGH ARCHITECTURE I/O Type: COMMON Freguency at 95MHz 95MHz terminals
IDT71T75902S80PF Applications
There are a lot of Integrated Device Technology (IDT) IDT71T75902S80PF Memory applications.