Welcome to Hotenda.com Online Store!

logo
userjoin
Home

IDT71V2546S133PFI

IDT71V2546S133PFI

IDT71V2546S133PFI

Integrated Device Technology (IDT)

2.53.3V V 100 Pin Memory IC 20mm mm

SOT-23

IDT71V2546S133PFI Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Package / Case LQFP
Surface Mount YES
Published 2008
JESD-609 Code e0
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 100
ECCN Code 3A991.B.2.A
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature PIPELINED ARCHITECTURE
HTS Code 8542.32.00.41
Subcategory SRAMs
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Reach Compliance Code not_compliant
Frequency 133MHz
Time@Peak Reflow Temperature-Max (s) 20
Pin Count 100
JESD-30 Code R-PQFP-G100
Qualification Status Not Qualified
Supply Voltage-Max (Vsup) 3.465V
Power Supplies 2.53.3V
Temperature Grade OTHER
Supply Voltage-Min (Vsup) 3.135V
Interface Parallel
Memory Type RAM, SRAM
Operating Mode SYNCHRONOUS
Supply Current-Max 0.31mA
Organization 128KX36
Output Characteristics 3-STATE
Memory Width 36
Standby Current-Max 0.045A
Memory Density 4718592 bit
Access Time (Max) 4.2 ns
I/O Type COMMON
Standby Voltage-Min 3.14V
Length 20mm
Height Seated (Max) 1.6mm
Width 14mm
RoHS Status Non-RoHS Compliant
IDT71V2546S133PFI Product Details

IDT71V2546S133PFI Overview


A RAM, SRAM-type memory can be classified as the memory type of this device. Embedded in the LQFP case, memory ics is a single file. A total of 100 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. The memory device in question has 100 pins, thus indicating that it has 100 memory locations that can be accessed. This chip features all the merits of a conventional chip, but it also features PIPELINED ARCHITECTURE to improve system performance. As for power supplies, this memory chip requires just 2.53.3V . As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than -40°C for this device. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. In order to operate your device, you will need to provide a maximum supply current of 0.31mA. Usually, this memory ics falls under the SRAMs component category. A frequency of 133MHz is used to process the data on this memory chip.

IDT71V2546S133PFI Features


Package / Case: LQFP
Additional Feature:PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 133MHz
133MHz terminals


IDT71V2546S133PFI Applications


There are a lot of Integrated Device Technology (IDT)
IDT71V2546S133PFI Memory applications.


  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory
  • Camcorders
  • embedded logic
  • eDRAM
  • graphics card

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News