Surface Mount 100 Pin Memory IC 4.5 Mb kb 20mm mm 330mA mA 36b b
SOT-23
IDT71V35761S166PFI Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
100
Published
2009
JESD-609 Code
e0
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
100
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Additional Feature
PIPELINED ARCHITECTURE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.65mm
Reach Compliance Code
not_compliant
Frequency
166MHz
Time@Peak Reflow Temperature-Max (s)
20
Pin Count
100
Qualification Status
Not Qualified
Operating Supply Voltage
3.3V
Temperature Grade
INDUSTRIAL
Interface
Parallel
Max Supply Voltage
3.465V
Min Supply Voltage
3.135V
Number of Ports
1
Nominal Supply Current
330mA
Memory Type
RAM, SRAM
Access Time
3.5 ns
Output Characteristics
3-STATE
Memory Width
36
Address Bus Width
17b
Density
4.5 Mb
Standby Current-Max
0.035A
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
36b
Length
20mm
RoHS Status
Non-RoHS Compliant
IDT71V35761S166PFI Product Details
IDT71V35761S166PFI Overview
In this case, the memory type of the device can be classified as RAM, SRAM. An embedded TQFP case surrounds memory ics. It is planted on the chip with 100 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 3.3V to be supplied to this ic memory chip in order to operate. The ic memory chip comes in a package with 100 pins that allows it to be connected to a computer. The memory device has a total of 100 pins, thus indicating that it has a total of 100 memory locations. It is noted that the operating supply voltage of this memory is 3.3V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 330mA for its nominal supply current when it comes to the memory component. This chip is not only loaded with advantages, but it also comes with PIPELINED ARCHITECTURE, which boosts the performance of your system. Several ports on this chip are used to access one memory address for reading and writing. I/O port addresses in this device are mapped to COMMON bits from the device's memory. In order for this device to function properly, its operating temperature must not be less than -40°C. The temperature should not exceed 85°C degrees Celsius. SRAMs components are usually considered types of this component. This memory ics should not be operated with a voltage below 3.135V volts at the minimum. There shall be a voltage limit of 3.465V for its operation. Using this memory chip, you will be able to process data at a speed of 166MHz times per second.
IDT71V35761S166PFI Features
Package / Case: TQFP 100 Pins Operating Supply Voltage:3.3V Additional Feature:PIPELINED ARCHITECTURE I/O Type: COMMON Freguency at 166MHz 166MHz terminals
IDT71V35761S166PFI Applications
There are a lot of Integrated Device Technology (IDT) IDT71V35761S166PFI Memory applications.