Surface Mount 100 Pin Memory IC 1 Mb kb 20mm mm 160mA mA 32b b
SOT-23
IDT71V432S7PFG8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Package / Case
TQFP
Number of Pins
100
Packaging
Tape and Reel
Published
2014
JESD-609 Code
e3
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
100
Terminal Finish
Matte Tin (Sn) - annealed
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
PIPELINED ARCHITECTURE
Subcategory
SRAMs
Technology
CMOS
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.65mm
Frequency
66MHz
Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED
Pin Count
100
Qualification Status
Not Qualified
Operating Supply Voltage
3.3V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
3.63V
Min Supply Voltage
3.135V
Number of Ports
1
Nominal Supply Current
160mA
Memory Type
RAM, SRAM
Access Time
7 ns
Organization
32KX32
Output Characteristics
3-STATE
Memory Width
32
Address Bus Width
15b
Density
1 Mb
I/O Type
COMMON
Sync/Async
Synchronous
Word Size
32b
Length
20mm
RoHS Status
RoHS Compliant
IDT71V432S7PFG8 Product Details
IDT71V432S7PFG8 Overview
A RAM, SRAM-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape and Reel case as well. Embedded in the TQFP case, memory ics is a single file. A total of 100 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. A 100-pin package containing this memory device is used to house this device. The memory device in question has 100 pins, thus indicating that it has 100 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 160mA for this memory component. This chip features all the merits of a conventional chip, but it also features PIPELINED ARCHITECTURE to improve system performance. 1 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 3.135V. An operating voltage of no more than 3.63V is required. A frequency of 66MHz is used to process the data on this memory chip.
IDT71V432S7PFG8 Features
Package / Case: TQFP 100 Pins Operating Supply Voltage:3.3V Additional Feature:PIPELINED ARCHITECTURE I/O Type: COMMON Freguency at 66MHz 66MHz terminals
IDT71V432S7PFG8 Applications
There are a lot of Integrated Device Technology (IDT) IDT71V432S7PFG8 Memory applications.