IDT71V632S7PFI Overview

There is a memory type RAM, SRAM for this type of device. The file is embedded in a LQFP case. The chip contains 100 terminations. As many as 1 functions are supported for comprehensive working. An 3.3V supply is required for this ic memory chip to operate properly. During the rotation of the clock, the ic memory chip is set as 66MHz. The memory device has 100 pins, which means that it has 100 memory locations, which indicates it is an 100-bit device. Although it has all the merits this chip has, it is also equipped with PIPELINED ARCHITECTURE to give a performance boost to the system. The power supply needed for this memory chip is only 3.3V . An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an -40°C operating temperature for this device. The part should not be operated at temperatures above 85°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. This device can be operated from a maximum supply current of 0.16mA under ideal conditions. The component is usually referred to as a type of SRAMs.

IDT71V632S7PFI Features

Package / Case: LQFP
Additional Feature:PIPELINED ARCHITECTURE
I/O Type: COMMON

IDT71V632S7PFI Applications

There are a lot of Integrated Device Technology (IDT)
IDT71V632S7PFI Memory applications.

• personal computers
• servers
• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic