IDT71V65603S150PFI8 Overview

A RAM, SRAM-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape & Reel (TR) case as well. Embedded in the LQFP case, memory ics is a single file. A total of 100 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. The memory device in question has 100 pins, thus indicating that it has 100 memory locations that can be accessed. As for power supplies, this memory chip requires just 3.3V . As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than -40°C for this device. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. In order to operate your device, you will need to provide a maximum supply current of 0.345mA. Usually, this memory ics falls under the SRAMs component category. A frequency of 150MHz is used to process the data on this memory chip.

IDT71V65603S150PFI8 Features

Package / Case: LQFP
I/O Type: COMMON
Freguency at 150MHz
150MHz terminals

IDT71V65603S150PFI8 Applications

There are a lot of Integrated Device Technology (IDT)
IDT71V65603S150PFI8 Memory applications.

• supercomputers
• telecommunications
• workstations,
• DVD disk buffer
• data buffer
• nonvolatile BIOS memory
• Camcorders
• embedded logic
• eDRAM
• graphics card