IDT74FCT16501CTPAG Overview

There is a neat TFSOP package used in buffer. A total of 2 elements are used. 56 terminations with different functions are available on this transceiver. An input voltage of 5V is required. FCT family part. With the electrical part, 56 pins are set. Surface Mount applications are suitable for it. The bus transceiver has 2 ports. For each element, there are 9 bits. In particular, automotive buffer is a type of Bus Driver/Transceivers. Power supplies with a 5V volt rating are recommended. The digital buffer requires a minimum voltage of 4.5V. For better service, buffer includes WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION. As low as -40°C can be tolerated by it. You shouldn't let the amibient temperature get higher than 85°C when using this buffer. It outputs 32mA when it is in low-level mode, which is the default. There is a possibility of the electronic component conducting 64mA of current when it is in high-level output mode. ICs that use REGISTERED BUS TRANSCEIVER logic are known as REGISTERED BUS TRANSCEIVER logic transceivers. POSITIVE EDGE triggers let you monitor the logic analyzer inputs for a specific pattern using this transceiver. INDEPENDENT CONTROL control technology allows the logical driver to start up.

IDT74FCT16501CTPAG Features

Bus Driver/Transceivers
WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION
High Level Output: 32mA
Low Level Output: 64mA
REGISTERED BUS TRANSCEIVER Logic IC
Trigger Type: POSITIVE EDGE

IDT74FCT16501CTPAG Applications

There are a lot of Integrated Device Technology (IDT)
IDT74FCT16501CTPAG Buffers & Transceivers applications.

• Wireless modems
• Remote controls
• Wireless network systems
• Satellite communications networks
• Ethernet circuitry
• Wired telephone
• Cordless telephone
• Desktop PC
• Notebook
• Pocket PC