IDT74FCT543ATSOG8 Overview

There is a neat SOIC package used in buffer. A Tape & Reel (TR) external packaging is used for this buffer. A total of 1 elements are used. 24 terminations with different functions are available on this transceiver. An input voltage of 5V is required. FCT family part. With the electrical part, 24 pins are set. Surface Mount applications are suitable for it. The bus transceiver has 2 ports. For each element, there are 8 bits. Power supplies with a 5V volt rating are recommended. The package is usually shaped like a TAPE AND REEL. The digital buffer requires a minimum voltage of 4.75V. For better service, buffer includes INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH. As low as -40°C can be tolerated by it. You shouldn't let the amibient temperature get higher than 85°C when using this buffer. It outputs 15mA when it is in low-level mode, which is the default. There is a possibility of the electronic component conducting 64mA of current when it is in high-level output mode. ICs that use REGISTERED BUS TRANSCEIVER logic are known as REGISTERED BUS TRANSCEIVER logic transceivers. INDEPENDENT CONTROL control technology allows the logical driver to start up.

IDT74FCT543ATSOG8 Features

INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH
High Level Output: 15mA
Low Level Output: 64mA
REGISTERED BUS TRANSCEIVER Logic IC

IDT74FCT543ATSOG8 Applications

There are a lot of Integrated Device Technology (IDT)
IDT74FCT543ATSOG8 Buffers & Transceivers applications.

• Wireless modems
• Remote controls
• Wireless network systems
• Satellite communications networks
• Ethernet circuitry
• Wired telephone
• Cordless telephone
• Desktop PC
• Notebook
• Pocket PC