HA7-2520-2 Overview

It is packaged in an CDIP-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 4mV for input offset voltage. A supply current of 4mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 83.52dB. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -55°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125°C. It is important to keep in mind that the power supply voltage of this electric component is below 18V, which is suitable. In order to conduct this part, you will need to provide dual supply voltages of 18V volts.

HA7-2520-2 Features

8 Pins
supply voltage of 15V
83.52dB voltage gain

HA7-2520-2 Applications

There are a lot of Intersil (Renesas Electronics America)
HA7-2520-2 Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering