ISL28006FH20Z-T7 Overview

A SOT-23 case is used to package the op amp. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. It is estimated that there will be 5 terminations in the next few months. It is important to remember that this op amp should be operated at a voltage of 12V volts. There are 5 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 1.2mV. An 50μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 1 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Voltage signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 125°C. The operating supply voltage of the buffer op amp is rated at 24V. I would like to point out that this electrical component is capable of working from a voltage below 28V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.7V at all times.

ISL28006FH20Z-T7 Features

supply voltage of 12V
26.02dB voltage gain
Output Type: Voltage

ISL28006FH20Z-T7 Applications

There are a lot of Intersil (Renesas Electronics America)
ISL28006FH20Z-T7 Instrumentational OP Amps applications.

• Addition operation circuits
• Subtraction operation circuits
• single/dual op amp sum and difference circuits
• Integrator circuits
• Differentiator circuits
• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement