Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ISL28207FUZ-T13

ISL28207FUZ-T13

ISL28207FUZ-T13

Intersil (Renesas Electronics America)

2 Channels 40mA per Channel 15pA 145 dB Instrumentational OP Amps 0.0006μA 28V MSOP

SOT-23

ISL28207FUZ-T13 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 5 Weeks
Mount Surface Mount
Package / Case MSOP
Number of Pins 8
Weight 139.989945mg
Packaging Tape & Reel
Published 2009
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn) - annealed
Max Operating Temperature 125°C
Min Operating Temperature -40°C
Subcategory Operational Amplifier
Packing Method TAPE AND REEL
Technology BIPOLAR
Terminal Form GULL WING
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Operating Supply Voltage 28V
Power Supplies +-5/+-15V
Temperature Grade AUTOMOTIVE
Number of Channels 2
Max Supply Voltage 40V
Min Supply Voltage 4.5V
Operating Supply Current 210μA
Supply Current-Max 0.7mA
Slew Rate 0.32 V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type OPERATIONAL AMPLIFIER
Common Mode Rejection Ratio 145 dB
Current - Input Bias 15pA
Output Current per Channel 40mA
Supply Type Dual, Single
Input Offset Voltage (Vos) 5μV
Bandwidth 1MHz
Gain Bandwidth Product 1MHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 1000 kHz
Voltage Gain 152dB
Average Bias Current-Max (IIB) 0.0006μA
Power Supply Rejection Ratio (PSRR) 145dB
Low-Offset YES
Frequency Compensation YES
Max Dual Supply Voltage 20V
Low-Bias YES
Micropower YES
Min Dual Supply Voltage 2.25V
Dual Supply Voltage 18V
Input Voltage Noise Density 14nV/sqrt Hz
Input Noise Current Density 0.053pA/sqrt Hz
Height 850μm
Length 3mm
Width 3mm
Radiation Hardening No
RoHS Status RoHS Compliant
ISL28207FUZ-T13 Product Details

ISL28207FUZ-T13 Overview


Packaged in a MSOP case, the buffer op amp is ready to use. An op amp ic of the OPERATIONAL AMPLIFIER type. The op amp is delivered to you in a Tape & Reel case. There is a growing number of terminations approaching the number of 8. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 5μV for this buffer op amp. As long as the supply current of the chip does not exceed 210μA, this op amp ic can operate. 152dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 125°C should be used. The operating supply voltage of the buffer op amp is rated at 28V. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 40V. A high supply voltage of more than 4.5V is recommended for the instrumentation amplifier's supply voltage. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 20V volts.

ISL28207FUZ-T13 Features


supply voltage of 5V
152dB voltage gain


ISL28207FUZ-T13 Applications


There are a lot of Intersil (Renesas Electronics America)
ISL28207FUZ-T13 Instrumentational OP Amps applications.


  • Integrator circuits
  • Differentiator circuits
  • Logarithmic operation circuits
  • Exponential operation circuits
  • Multiplication circuits
  • Division circuits
  • Precision measurement
  • Power control
  • Information processing
  • Weak signal detection

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News