Surface Mount 86 Pin Memory IC 128 Mb kb 22.22mm mm 180mA mA
SOT-23
IS42S32400E-6TL Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
86-TFSOP (0.400, 10.16mm Width)
Number of Pins
86
Operating Temperature
0°C~70°C TA
Packaging
Tray
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
86
ECCN Code
EAR99
Terminal Finish
Matte Tin (Sn) - annealed
Additional Feature
AUTO/SELF REFRESH
HTS Code
8542.32.00.02
Technology
SDRAM
Voltage - Supply
3V~3.6V
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.5mm
[email protected] Reflow Temperature-Max (s)
10
Pin Count
86
Operating Supply Voltage
3.3V
Supply Voltage-Max (Vsup)
3.6V
Supply Voltage-Min (Vsup)
3V
Memory Size
128Mb 4M x 32
Number of Ports
1
Nominal Supply Current
180mA
Memory Type
Volatile
Max Supply Current
180mA
Clock Frequency
166MHz
Access Time
5.4ns
Memory Format
DRAM
Memory Interface
Parallel
Data Bus Width
32b
Organization
4MX32
Output Characteristics
3-STATE
Address Bus Width
14b
Density
128 Mb
Standby Current-Max
0.001A
I/O Type
COMMON
Refresh Cycles
4096
Height
1mm
Length
22.22mm
Width
10.16mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Lead Free
IS42S32400E-6TL Product Details
IS42S32400E-6TL Overview
As far as its memory type goes, it falls into the Volatile category. In addition, memory ics is available in a Tray case as well. The case is embedded in 86-TFSOP (0.400, 10.16mm Width). On the chip, there is an 128Mb 4M x 32 memory, which is the size of the chip's memory. There is a DRAM-format memory used in this device, which is the memory format used by mainstream devices. Due to its wide temperature range of 0°C~70°C TA, this device is well suited to a wide range of applications that require high performance. A voltage of 3V~3.6V is possible to be applied to the supply. It is recommended to mount it in the Surface Mount mounting type. There are 86 terminations on the chip. In total, this part supports 1 functions. Memory devices such as this one are designed to be powered by 3.3V and should be used as such. During the rotation of the clock, the ic memory chip is set as 166MHz. A package of 86 pins is used to protect this memory device. The memory device in question has 86 pins, thus indicating that it has 86 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. This chip is configured to use Surface Mount mounting, a straight forward, high-efficiency mounting fashion. It is rated for a nominal supply current of 180mA for this memory component. This chip features all the merits of a conventional chip, but it also features AUTO/SELF REFRESH to improve system performance. Using 1 ports, a single memory address can be read and/or written. A memory mapped I/O port address of COMMON bits is used in this device. An 180mA volt maximum current is required to run it.