Surface Mount 86 Pin Memory IC 256 Mb kb 22.22mm mm 180mA mA
SOT-23
IS42S32800D-75ETL Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
86-TFSOP (0.400, 10.16mm Width)
Number of Pins
86
Operating Temperature
0°C~70°C TA
Packaging
Tray
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
86
ECCN Code
EAR99
Terminal Finish
Matte Tin (Sn) - annealed
Additional Feature
AUTO/SELF REFRESH
HTS Code
8542.32.00.24
Technology
SDRAM
Voltage - Supply
3V~3.6V
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.5mm
[email protected] Reflow Temperature-Max (s)
10
Pin Count
86
Qualification Status
Not Qualified
Operating Supply Voltage
3.3V
Supply Voltage-Max (Vsup)
3.6V
Supply Voltage-Min (Vsup)
3V
Memory Size
256Mb 8M x 32
Number of Ports
1
Nominal Supply Current
180mA
Memory Type
Volatile
Operating Mode
SYNCHRONOUS
Clock Frequency
133MHz
Access Time
5.5ns
Memory Format
DRAM
Memory Interface
Parallel
Data Bus Width
32b
Organization
8MX32
Memory Width
32
Address Bus Width
13b
Density
256 Mb
Standby Current-Max
0.003A
I/O Type
COMMON
Refresh Cycles
4096
Sequential Burst Length
1248FP
Interleaved Burst Length
1248
Height Seated (Max)
1.2mm
Length
22.22mm
RoHS Status
RoHS Compliant
IS42S32800D-75ETL Product Details
IS42S32800D-75ETL Overview
As far as its memory type goes, it falls into the Volatile category. The case comes in the Tray style. Embedded in the 86-TFSOP (0.400, 10.16mm Width) case, memory ics is a single file. Memory size on the chip is 256Mb 8M x 32. In this device, the memory is of the DRAM-format, which is a popular format in the mainstream computing sector. Due to its extended operating temperature range, the device is well suited for a wide range of demanding applications. The device is capable of handling a supply voltage of 3V~3.6V. The recommended mounting type for this device is Surface Mount. It is planted on the chip with 86 terminations. In total, 1 functions are supported by this part. There is a requirement for 3.3V to be supplied to this ic memory chip in order to operate. A clock frequency rotation within 133MHz is used for the ic memory chip to rotate data. The memory device has an 86-pin package, which encloses it in a small package. A memory device like this has 86 pins, indicating that there are 86 memory locations on the device. There is a note stating that this memory chip operates at 3.3V. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. In terms of its nominal supply current, this memory component is rated at 180mA. In spite of all the merits this chip has, it also features AUTO/SELF REFRESH to level up system performance. Using 1 ports, a single memory address can be read and/or written. A memory map of COMMON bits has been added to the I/O port addresses of this device.