Welcome to Hotenda.com Online Store!

logo
userjoin
Home

IS42S81600E-7TLI

IS42S81600E-7TLI

IS42S81600E-7TLI

ISSI, Integrated Silicon Solution Inc

Surface Mount 54 Pin Memory IC 128 Mb kb 22.22mm mm 130mA mA

SOT-23

IS42S81600E-7TLI Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 54-TSOP (0.400, 10.16mm Width)
Number of Pins 54
Operating Temperature -40°C~85°C TA
Packaging Tray
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 54
ECCN Code EAR99
Terminal Finish Matte Tin (Sn) - annealed
Additional Feature AUTO/SELF REFRESH
Technology SDRAM
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.8mm
[email protected] Reflow Temperature-Max (s) 10
Pin Count 54
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Memory Size 128Mb 16M x 8
Number of Ports 1
Nominal Supply Current 130mA
Memory Type Volatile
Max Supply Current 130mA
Clock Frequency 143MHz
Access Time 5.4ns
Memory Format DRAM
Memory Interface Parallel
Data Bus Width 8b
Organization 16MX8
Output Characteristics 3-STATE
Memory Width 8
Address Bus Width 14b
Density 128 Mb
Standby Current-Max 0.002A
I/O Type COMMON
Refresh Cycles 4096
Sequential Burst Length 1248FP
Interleaved Burst Length 1248
Height Seated (Max) 1.2mm
Length 22.22mm
Radiation Hardening No
RoHS Status RoHS Compliant
IS42S81600E-7TLI Product Details

IS42S81600E-7TLI Overview


Volatile is its memory type. Tray-cases are available. The 54-TSOP (0.400, 10.16mm Width) case contains it. 128Mb 16M x 8 is the chip's memory size. In this device, the memory is of the DRAM-format, which is a popular format in the mainstream computing sector. This device has an extended operating temperature range of -40°C~85°C TA, so it's perfect for a wide range of demanding applications. A supply voltage of 3V~3.6V can be applied to it. The recommended mounting type for this device is Surface Mount. A total of 54 terminations have been planted on the chip. For a comprehensive working procedure, this part supports as many as 1 functions. The memory device is designed to be supplied with an 3.3V volt power supply in order to operate properly. In the memory, there is a clock frequency rotation that ranges 143MHz. A 54-pin package containing this memory device is used to house this device. I have noticed that the memory device has 54 pins, which indicates that it has 54 locations in the memory. There is a note stating that this memory chip operates at 3.3V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. In terms of its nominal supply current, this memory component has a rating of 130mA. Although it has all the merits this chip has, it is also equipped with AUTO/SELF REFRESH to give a performance boost to the system. The memory chip has 1 ports for granting read/write access to one memory address. This device has COMMON-bit memory mapped I/O port addresses. An 130mA volt maximum current is required to run it.

IS42S81600E-7TLI Features


Package / Case: 54-TSOP (0.400, 10.16mm Width)
54 Pins
Operating Supply Voltage:3.3V
Additional Feature:AUTO/SELF REFRESH
I/O Type: COMMON

IS42S81600E-7TLI Applications


There are a lot of ISSI, Integrated Silicon Solution Inc IS42S81600E-7TLI Memory applications.

  • nonvolatile BIOS memory
  • multimedia computers
  • graphics card
  • cell phones
  • servers
  • Camcorders
  • telecommunications
  • hard disk drive (HDD)
  • data buffer
  • Cache memory

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News