As far as its memory type goes, it falls into the Volatile category. It comes in a Tape & Reel (TR). In the case of 100-LQFP, it is embedded within the case. On the chip, there is an 18Mb 512K x 36 memory, which is the size of the chip's memory. In this device, the memory is of the SRAM-format, which is a popular format in the mainstream computing sector. This device has an extended operating temperature range of -40°C~85°C TA, so it's perfect for a wide range of demanding applications. The device is capable of handling a supply voltage of 2.375V~2.625V. The recommended mounting type for memory ics is Surface Mount. A clock frequency rotation within 200MHz is used for the ic memory chip to rotate data. The memory device is enclosed in a package with an 100-pin connector. It is noted that the operating supply voltage of this memory is 2.5V. The memory chip has 4 ports for granting read/write access to one memory address. A minimum operating temperature of -40°C must be met by this device. It is recommended that operation of the part be restricted to temperatures not exceeding 85°C, otherwise damage to the part may occur as a result of overheating. It is recommended that this part be supplied with at least 2.375V volts. In order for it to operate properly, its voltage should not exceed 2.625V. A ic memory chip like this one processes data at a frequency of 200MHz bits per second. This ic memory chip runs at a maximum frequency up to 200MHz.