IXDD430MCI Overview

In order to increase flexibility, the package TO-220-5 is used.Gate drivers is packaged in the way of Bulk.Gate drivers incorporates wGate driversh 1 drivers for Gate driverss configuration.Ideally, it should be mounted in the direction of Through Hole.When the supply voltage is set to 8.5V~35V, it can demonstrate its superiority.Gate type IGBT, N-Channel, P-Channel MOSFET has been used in its design.Temperature range -55°C~150°C TJ is allowed for this device.This program uses the input type of Non-Inverting.5 terminations constitute its foundation.Under its base part number IXD*430, various related parts can be found.The device is mounted using Through Hole.In order to operate, a voltage of 18V has to be applied.In this case, BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER serves as the interface IC.On the board, there are 3 component pins.The output current can be set to 30A.Its maximum power dissipation of 2W also demonstrates its maximum ability to transfer power without overheating.A voltage of 35V should be set for the operating supply voltage.

IXDD430MCI Features

Embedded in the Bulk package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
Maximum power dissipation of 2W

IXDD430MCI Applications

There are a lot of IXYS IXDD430MCI gate drivers applications.

• Broadcast equipment
• Dual-Battery Systems
• Portable Navigation Devices
• Refrigerator
• Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
• Smart Phones
• 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
• Active filtering
• Isolated switch mode power supplies (SMPS)
• High frequency line drivers