LIA100 Overview
Packaging for the buffer amplifier is in the form of a 16-DIP (0.300, 7.62mm) case. A Isolation-type buffer amplifier is shown here. Linear amplifier is delivered in a Tube case. In total, the buffer amplifier consists of 16 pins. Op amp ic rates 3mV for input offset voltage. This electronic part is best mounted with type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. As long as the supply current of the chip does not exceed 5mA, this op amp ic can operate. In total, there are 2 circuits on this buffer amplifier. 2 channels are available on the instrumentation amplifier. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. It is recommended that op amp be used at temperatures below 85°C. As a result, it is recommended that a power supply of 5mA be used with this electronic part. With regard tp supply voltage, op amp is used under 18V. A high supply voltage of more than 5V is recommended for the instrumentation amplifier's supply voltage.
LIA100 Features
LIA100 Applications
There are a lot of IXYS Integrated Circuits Division LIA100 Instrumentational OP Amps applications.
- Communication device
- Medical instruments
- Semiconductor detectors
- Thermocouples
- Proportional operation circuits
- Laptop
- Measurements of Wheatstone bridge
- High speed sample
- Oscilloscopes
- Signal filtering
