MXHV9910BETR Overview

There is also a 8-SOIC (0.154, 3.90mm Width) Exposed Pad package that is used to save space on the board. In LED drivers, the outputs are all set to 1.Surface Mount is used to mount the led light driver.Initially, it emerges as a AC DC Offline Switcher with high efficiency and a high degree of reliability.-40°C~85°C TA is a valid operating temperature for the led driver.Signage has many advantages.In this case, the frequency is 64kHz.With a base of 8, this LED light driver is configured.Undetermined failures may occur if the voltage supply falls below 8V.As you can see, it is mounted by Surface Mount.It is acceptable to supply voltages of 8.4V volts.Optimally, it provides a voltage value of 450V for the maximum supply voltage.A minimum supply voltage of 7.2V is required to meet the highest efficiency standards.The operating temperature should not exceed 85°C to ensure stable operation.Stable operation requires an operating temperature greater than -40°C.Powering systems requires an internal voltage of 7.8V.There is 7.8V output voltage on this device.

MXHV9910BETR Features

Available in the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 64kHz
Operating with the supply voltage of 7.8V
Output voltage of 7.8V

MXHV9910BETR Applications

There are a lot of IXYS Integrated Circuits Division MXHV9910BETR LED Driver ICs applications.

• OLED power supply for portable equipment
• Amusement Machines
• LED headlights
• Scanners and Handy Terminals
• Stage Lighting and Signage
• Power source for accessories such as car audios, car navigation systems, and ETC systems
• Auxiliary lights for on-vehicle cameras
• Refrigeration lighting
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• General lighting