XPDNC2000-01 Overview

MPU Core is the type of module or board that is used in this microcontroller.Microprocessor chip is powered by a processor with a total of DSTni-EX cores in it.It is default for the microcontroller to set the mode to -40°C~85°C.There is a flash size 512KB on the MCU electronics.In this case, the connector type is RJ45.There are two versions of this microcontrollers in the XPort® Direct+™ Series.This is done to make sure that the software is able to run normally and that the RAM size is reduced to 256KB.In this MCU chip, the speed is set to 25MHz.As of right now, 85°C is the maximum operational temperature at this time.Microprocessor should be warmer than -40°C when microprocessor is operating.An Intel XPort Direct+ Core Processor is at the heart of this MCUs.This microcontrollers operates on a 3.3V volt supply which is the voltage of the operating supply.The MCUs has been configured to operate at 200mA supply current, which is the default value.

XPDNC2000-01 Features

Core processor of DSTni-EX
Flash size of 512KB
Speed of 25MHz

XPDNC2000-01 Applications

There are a lot of Lantronix, Inc.
XPDNC2000-01 Microcontroller, Microprocessor, FPGA Modules applications.

• Industrial Control
• Process Control
• Process Monitoring
• Healthcare Monitoring
• Patient Monitoring
• IoT Secure Gateways
• Human Machine Interface
• Human Machine Control Panel
• Home and Building Automation
• Thermostat