GAL16V8D-10LP Overview

There are 8 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is contained in package [0].There are 8 I/Os programmed in it.There is a 20terminations set on devices.DUALis the terminal position of this electrical part.The device is powered by a voltage of 5V volts.There is a part in the family [0].It is packaged in the way of Bulk.A reliable operation is ensured by the operating temperature of [0].The chip should be mounted by Through Hole.As part of the GAL?16V8series, it is a type of FPGA.Chips are programmed with 20 pins.If this device is used, you will also be able to find [0].The GAL16V8indicates that related parts can be found.Optimal efficiency requires a supply voltage of [0].It is mounted by Through Hole.20pins are included in its design.A maximum supply voltage of 5.25Vis used in its operation.The minimal supply voltage is 4.75V.A total of 5V power supplies are needed to run it.This frequency is 83.3MHz.A total of 8dedicated inputs are available for detecting the status of input signals.It is configured with 8 output.In addition, it contains 64 product terms.

GAL16V8D-10LP Features

20-DIP (0.300, 7.62mm) package
8 I/Os
The operating temperature of 0°C~75°C TA
20 pin count
20 pins
5V power supplies
8 outputs

GAL16V8D-10LP Applications

There are a lot of Lattice Semiconductor Corporation GAL16V8D-10LP CPLDs applications.

• D/T registers and latches
• ROM patching
• POWER-SAVING MODES
• Wide Vin Industrial low power SMPS
• Complex programmable logic devices
• ON-CHIP OSCILLATOR CIRCUIT
• Software-Driven Hardware Configuration
• DDC INTERFACE
• SUPERVISORY FUNCTION (LVD AND WATCHDOG)
• Timing control