GAL18V10B-10LP Overview

Currently, there are 10 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.There is a 20-DIP (0.300, 7.62mm) package containing it.There are 10 I/Os on the board.Terminations of devices are set to 20.DUAL is the terminal position of this electrical part.A voltage of 5Vprovides power to the device.There is a part in the family Programmable Logic Devices.It is recommended that the chip be packaged by Tube.The device operates at a temperature of 0°C~75°C TA in order to ensure its reliability.Ideally, the chip should be mounted by Through Hole.The GAL®18V10 series FPGA is one of these types.In this chip, the 20 pins are programmed.If you use this device, you will also find REGISTER PRELOAD; POWER-UP RESET.The GAL18V10 can be used to identify its related parts.Optimal efficiency requires a supply voltage of 5V.A Through Hole is mounted on this electronic component.There are 20 pins on it.There is a maximum supply voltage of 5.25V when the device is operating.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.A power supply of 5V is required to operate it.This can be achieved at a frequency of 105MHz.The input signals are detected by 7 dedicated inputs.This device is configured to output 10.The product is equipped with 96 terms.

GAL18V10B-10LP Features

20-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of 0°C~75°C TA
20 pin count
20 pins
5V power supplies
10 outputs

GAL18V10B-10LP Applications

There are a lot of Lattice Semiconductor Corporation
GAL18V10B-10LP CPLDs applications.

• Bootloaders for FPGAs
• Address decoders
• Custom state machines
• Digital systems
• Portable digital devices
• Handheld digital devices
• Battery operated portable devices
• Complex programmable logic devices
• Digital designs
• Field programmable gate