GAL20RA10B-30LP Overview

There are 10 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is packaged with 24-DIP (0.300, 7.62mm).The device is programmed with 10 I/Os.The termination of a device is set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.An electrical supply voltage of 5V is used to power it.It is included in Programmable Logic Devices.Tubeshould be used for packaging the chip.The device operates at a temperature of 0°C~75°C TAin order to ensure its reliability.It is recommended to mount the chip by Through Hole.FPGAs belonging to the GAL?20RA10series contain this type of chip.It has 24pins programmed.It is also possible to find REGISTER PRELOAD; POWER-UP RESETwhen using this device.There are related parts in [0].The supply voltage should be maintained at 5V for high efficiency.The electronic component is mounted by Through Hole.The 24pins are designed into the board.It operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.A power supply of 5Vvolts is required to operate this device.It is possible to achieve a frequency of 25MHz.The input signals are detected by 10dedicated inputs.The output is configured with the value [0].The product has 80 product terms.

GAL20RA10B-30LP Features

24-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of 0°C~75°C TA
24 pin count
24 pins
5V power supplies
10 outputs

GAL20RA10B-30LP Applications

There are a lot of Lattice Semiconductor Corporation GAL20RA10B-30LP CPLDs applications.

• Reset swapping
• ANALOG-TO-DIGITAL CONVERTOR (ADC)
• Synchronous or asynchronous mode
• Wide Vin Industrial low power SMPS
• Timing control
• Pattern recognition
• State machine design
• DMA control
• State machine control
• ROM patching