LC4032C-10TN48I Overview

32 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is packaged with 48-LQFP.The device is programmed with 32 I/O ports.It is programmed to terminate devices at [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power source is powered by 1.8Vvolts.This part is part of the family [0].It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].Surface Mountshould be used for mounting the chip.In FPGA terms, it is a type of ispMACH? 4000Cseries FPGA.In this chip, the 48pins are programmed.When using this device, YESis also available.The LC4032shows its related parts.800gates are devices that serve as building blocks for digital circuits.High efficiency requires a voltage supply of [0].Data storage is performed using [0].Surface Mountmounts this electronic component.48pins are included in its design.A maximum voltage of 1.95Vis required for operation.A minimum supply voltage of 1.65V is required for it to operate.Programmable I/Os are counted up 100.There can be 125MHz frequency achieved.Input signals are detected using 4dedicated inputs.In order to form a fundamental building block, there are 2logic elements/cells.

LC4032C-10TN48I Features

48-LQFP package
32 I/Os
The operating temperature of -40°C~105°C TJ
48 pin count
48 pins

LC4032C-10TN48I Applications

There are a lot of Lattice Semiconductor Corporation LC4032C-10TN48I CPLDs applications.

• Software Configuration of Add-In Boards
• Digital multiplexers
• D/T registers and latches
• I2C BUS INTERFACE
• Dedicated input registers
• SUPERVISORY FUNCTION (LVD AND WATCHDOG)
• Multiple Clock Source Selection
• White goods (Washing, Cold, Aircon ,...)
• I/O PORTS (MCU MODULE)
• ON-CHIP OSCILLATOR CIRCUIT