LC4064B-5TN44I Overview

There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).44-TQFPis the package in which it resides.There are 30 I/Os programmed in it.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 2.5V is used as the power supply for this device.This part is in the family [0].As a result, it is packaged as Tray.Due to its reliability, it is operated at a temperature of [0].There should be a Surface Mounton the chip.In FPGA terms, it is a type of ispMACH? 4000Bseries FPGA.A chip with 44pins is programmed.It is also possible to find YESwhen using this device.The LC4064shows its related parts.If high efficiency is desired, the supply voltage should be kept at [0].In general, it is recommended to store data in [0].This electronic part is mounted in the way of Surface Mount.There are 44 pins embedded in the device.With a maximum supply voltage of [0], it operates.A minimum supply voltage of 2.3V is required for it to operate.A logic element or block has 4elements.Programmable I/Os are counted up 208.The maximal frequency should be lower than 400MHz.Input signals are detected by 2dedicated inputs.

LC4064B-5TN44I Features

44-TQFP package
30 I/Os
The operating temperature of -40°C~105°C TJ
44 pin count
44 pins

LC4064B-5TN44I Applications

There are a lot of Lattice Semiconductor Corporation LC4064B-5TN44I CPLDs applications.

• White goods (Washing, Cold, Aircon ,...)
• USB Bus
• Software Configuration of Add-In Boards
• High speed graphics processing
• Random logic replacement
• Programmable polarity
• Wide Vin Industrial low power SMPS
• DMA control
• Auxiliary Power Supply Isolated and Non-isolated
• Digital multiplexers