LC4064V-75TN100C Overview

There are 64 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.In the 100-LQFPpackage, you will find it.There are 64 I/Os programmed in it.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of QUADand is connected to the ground.The device is powered by a voltage of 3.3V volts.It is included in Programmable Logic Devices.The chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000V series.A chip with 100pins is programmed.It is also possible to find YESwhen using this device.You can find its related parts in the [0].If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is adopted to store data in [0].In this case, Surface Mountis used to mount the electronic component.There are 100pins on it.It operates at a maximum supply voltage of 3.6V volts.A minimum supply voltage of 3V is required for this device to operate.In total, there are 4 logic elements/blocks.This frequency is 178.57MHz.A total of 10dedicated inputs are available for detecting the status of input signals.In order to form a fundamental building block, there are 36 logic elements or cells.

LC4064V-75TN100C Features

100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins

LC4064V-75TN100C Applications

There are a lot of Lattice Semiconductor Corporation LC4064V-75TN100C CPLDs applications.

• Cross-Matrix Switch
• Programmable power management
• Digital designs
• White goods (Washing, Cold, Aircon ,...)
• D/T registers and latches
• Address decoding
• Power up sequencing
• Address decoders
• ROM patching
• Synchronous or asynchronous mode