LC4128C-10TN128I Overview

128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.In the 128-LQFPpackage, you will find it.As you can see, this device has 92 I/O ports programmed into it.Devices are programmed with terminations of [0].QUADis the terminal position of this electrical part.Power is supplied by a voltage of 1.8V volts.It is a part of the family [0].As a result, it is packaged as Tray.During operation, the operating temperature is kept at -40°C~105°C TJ to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.The FPGA belongs to the ispMACH? 4000C series.In this chip, the 128pins are programmed.If this device is used, you will also be able to find [0].Its related parts can be found in the [0].High efficiency requires a voltage supply of [0].EEPROM is adopted for storing data.It is mounted by Surface Mount.With a maximum supply voltage of [0], it operates.A minimum supply voltage of 1.65V is required for this device to operate.Programmable I/Os are counted up 484.In this case, 125MHzis the frequency that can be achieved.The status of input signals is detected by 4dedicated inputs.There are 8 logic elements/cells on the device.

LC4128C-10TN128I Features

128-LQFP package
92 I/Os
The operating temperature of -40°C~105°C TJ
128 pin count

LC4128C-10TN128I Applications

There are a lot of Lattice Semiconductor Corporation LC4128C-10TN128I CPLDs applications.

• Multiple DIP Switch Replacement
• POWER-SAVING MODES
• Software-driven hardware configuration
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• I2C BUS INTERFACE
• Reset swapping
• Discrete logic functions
• D/T registers and latches
• DMA control
• State machine control