LC4384B-35TN176C Overview

There are 384 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the 176-LQFPpackage, you will find it.The device is programmed with 128 I/O ports.Devices are programmed with terminations of [0].This electrical part has a terminal position of QUADand is connected to the ground.It is powered from a supply voltage of 2.5V.This part is included in Programmable Logic Devices.It is recommended to package the chip by Tray.During operation, the operating temperature is kept at 0°C~90°C TJ to ensure its reliability.The chip should be mounted by Surface Mount.The ispMACH? 4000Bseries FPGA is one of these types.It is programmed with 176 pins.If this device is used, you will also be able to find [0].The LC4384shows its related parts.High efficiency requires the supply voltage to be maintained at [0].Data storage is performed using [0].In this case, Surface Mountis used to mount the electronic component.There are 176 pins on the device.With a maximum supply voltage of [0], it operates.A minimum supply voltage of 2.3V is required for this device to operate.There are 44 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. The maximum frequency should not exceed 322MHz.To detect input signals, there are 4 dedicated inputs.In order to form a fundamental building block, there are 24logic elements/cells.

LC4384B-35TN176C Features

176-LQFP package
128 I/Os
The operating temperature of 0°C~90°C TJ
176 pin count
176 pins

LC4384B-35TN176C Applications

There are a lot of Lattice Semiconductor Corporation LC4384B-35TN176C CPLDs applications.

• Custom shift registers
• Software Configuration of Add-In Boards
• DMA control
• Protection relays
• Voltage level translation
• Preset swapping
• Interface bridging
• Address decoders
• ROM patching
• State machine control