LC4512C-75T176I Overview

The mobile phone network has 512 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).You can find it in package [0].There are 128 I/Os on the board.There are 176 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The device is powered by a voltage of 1.8V volts.There is a part included in Programmable Logic Devices.Trayshould be used to package the chip.During operation, the operating temperature is kept at -40°C~105°C TJ to ensure its reliability.Surface Mountshould be used for mounting the chip.It belongs to the ispMACH? 4000Cseries of FPGAs.With 176pins programmed, the chip is ready to use.This device can also display [0].According to the LC4512, its related parts can be found.It is recommended that the supply voltage be kept at 1.8Vto maximize efficiency.For storing data, it is recommended to use [0].In this case, Surface Mountis used to mount the electronic component.This board has 176 pins.It operates with the maximal supply voltage of 1.95V.Normally, it operates with a voltage of 1.65VV as its minimum supply voltage.There are 32 logic elements/blocks.A programmable I/O count of 48 has been recorded.Ideally, the maximal frequency should be lower than 322MHz Hz.The input signals are detected by 4dedicated inputs.

LC4512C-75T176I Features

176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins

LC4512C-75T176I Applications

There are a lot of Lattice Semiconductor Corporation LC4512C-75T176I CPLDs applications.

• D/T registers and latches
• Dedicated input registers
• INTERRUPT SYSTEM
• Complex programmable logic devices
• Handheld digital devices
• Boolean function generators
• Software Configuration of Add-In Boards
• Parity generators
• Cross-Matrix Switch
• I2C BUS INTERFACE