LC5512MB-75F256I Overview

There are 512 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.You can find it in package [0].As you can see, this device has 193 I/O ports programmed into it.Terminations of devices are set to [0].The terminal position of this electrical component is BOTTOM.A voltage of 2.5V is used as the power supply for this device.It is a part of family [0].Ideally, the chip should be packaged by Tray.During operation, the operating temperature is kept at -40°C~105°C TJ to ensure its reliability.Surface Mountshould be used for mounting the chip.The ispXPLD? 5000MBseries FPGA is one of these types.In this chip, the 256pins are programmed.When using this device, YEScan also be found.The LC5512indicates that its related parts can be found.A high level of efficiency can be achieved by maintaining the supply voltage at [0].For data storage, EEPROM, SRAMis adopted.A Surface Mountis mounted on this electronic component.256pins are included in its design.There is a maximum supply voltage of 2.7Vwhen the device is operating.In order for it to operate, a supply voltage of 2.3Vis required.16logic blocks/elements are present.In this case, 200MHzis the frequency that can be achieved.

LC5512MB-75F256I Features

256-BGA package
193 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
256 pins

LC5512MB-75F256I Applications

There are a lot of Lattice Semiconductor Corporation LC5512MB-75F256I CPLDs applications.

• DDC INTERFACE
• D/T registers and latches
• Battery operated portable devices
• I/O expansion
• Page register
• Power Meter SMPS
• State machine control
• ANALOG-TO-DIGITAL CONVERTOR (ADC)
• Preset swapping
• Complex programmable logic devices