M4A3-256/128-7FAC Overview

256 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a 256-BGA package.The device is programmed with 128 I/O ports.It is programmed to terminate devices at 256.There is a BOTTOM terminal position on the electrical part in question.The device is powered by a voltage of 3.3V volts.It is a part of the family Programmable Logic Devices.It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at 0°C~70°C TA.It is recommended to mount the chip by Surface Mount.FPGAs belonging to the ispMACH® 4A series contain this type of chip.With 256 pins programmed, the chip is ready to use.When using this device, YES is also available.You can find its related parts in the M4A3-256.10000 gates are used to construct digital circuits.If high efficiency is desired, the supply voltage should be kept at 3.3V.It is recommended that data be stored in EEPROM.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.With a minimal supply voltage of 3V, it operates.Currently, there are 160 Programmable I/Os available.It is important to make sure that the maximum frequency is less than 125MHz.The status of input signals is determined by 14 dedicated inputs.

M4A3-256/128-7FAC Features

256-BGA package
128 I/Os
The operating temperature of 0°C~70°C TA
256 pin count

M4A3-256/128-7FAC Applications

There are a lot of Lattice Semiconductor Corporation
M4A3-256/128-7FAC CPLDs applications.

• Digital systems
• Portable digital devices
• Handheld digital devices
• Battery operated portable devices
• Complex programmable logic devices
• Digital designs
• Field programmable gate
• Address decoding
• D/T registers and latches
• Synchronous or asynchronous mode