M4A3-32/32-10VC48 Overview

Currently, there are 32 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is contained in package [0].This device has 32 I/O ports programmed into it.The termination of a device is set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The device is powered by a voltage of 3.3V volts.It is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.The ispMACH? 4Aseries FPGA is one of these types.This device can also display [0].The M4A3-32indicates that related parts can be found.There are 1250 gates, which are devices that acts as a building block for digital circuits. A high level of efficiency can be achieved by maintaining the supply voltage at [0].In order to store data, EEPROMis used.The electronic part is mounted by Surface Mount.A total of 48pins are provided on this board.A voltage of 3.6V is the maximum supply voltage for this device.Initially, it requires a voltage of 3Vas the minimum supply voltage.A total of 97 Programmable I/Os are available.Ideally, the maximal frequency should be lower than 100MHz Hz.

M4A3-32/32-10VC48 Features

48-LQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
48 pins

M4A3-32/32-10VC48 Applications

There are a lot of Lattice Semiconductor Corporation M4A3-32/32-10VC48 CPLDs applications.

• Programmable polarity
• Configurable Addressing of I/O Boards
• I2C BUS INTERFACE
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• D/T registers and latches
• Dedicated input registers
• Wide Vin Industrial low power SMPS
• Wireless Infrastructure Base Band Unit and Remote Radio Unit
• Programmable power management
• ANALOG-TO-DIGITAL CONVERTOR (ADC)