M4A5-192/96-7VNI Overview

Currently, there are 192 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.A 144-LQFP package contains the item.As a result, it has 96 I/O ports programmed.144terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power source is powered by 5Vvolts.It is a part of family [0].It is recommended to package the chip by Tray.To ensure reliability, the device operates at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.It belongs to the ispMACH? 4Aseries of FPGAs.There are 144pins on the chip.This device can also display [0].The M4A5-192contains its related parts.7500gates are used to construct digital circuits.In order to maintain high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.Surface Mountis the mounting point of this electronic part.There are 144 pins embedded in the device.This device operates at a voltage of 5.5V when the maximum supply voltage is applied.In order for it to operate, a supply voltage of 4.5Vis required.A power supply of 5Vvolts is required to operate this device.There are 680 Programmable I/Os.The maximal frequency should be lower than 125MHz.The status of input signals is determined by 16dedicated inputs.

M4A5-192/96-7VNI Features

144-LQFP package
96 I/Os
The operating temperature of -40°C~85°C TA
144 pin count
144 pins
5V power supplies

M4A5-192/96-7VNI Applications

There are a lot of Lattice Semiconductor Corporation M4A5-192/96-7VNI CPLDs applications.

• INTERRUPT SYSTEM
• Parity generators
• Digital multiplexers
• Address decoding
• Cross-Matrix Switch
• PLC analog input modules
• ANALOG-TO-DIGITAL CONVERTOR (ADC)
• Power Meter SMPS
• DDC INTERFACE
• Complex programmable logic devices